Not 100% sure I want to sale my bike because this is my baby but just never have time for it. If someone made a good offer than I will see.

Never been down, never in rain, never raced, not one single scratch on this bike. All maint has been done by Faron at www.gixxertek.com.
9K Miles - Clean Title
Original Owner
M4 Shorty Exhaust - THE SOUND ON THIS THING IS AMAZING!!!
Front Steal Braided Break Line
Black Pazzo Racing Levers
Black Powder coated all the pegs
Dunlop Q2s - almost brand new
Pit Bull Rear Stand
$6500 - OBO NO TRADES!!!

http://seattle.craigslist.org/see/mcy/1941672213.html

Selling a used XL Scorpion EXO-700 Black Dahlia. The helmet has a few scratches and comes with a progressive tint. All reasonable offers considered.

2007 KTM 950 Supermoto for sale with 19,6XX on the odometer, I bought it at about 15K. Runs and start strong and plenty fast for just about any situation especially carving up and down 178, 215, etc. Has a Leo Vince exhaust system without the dB killer tips so it is a bit loud. Performed a valve job around 17K and also replaced the chain and rear sprocket about the same time. All fluids have been changed as per spec and new spark plugs and battery have been recently installed. Running good condition Pilot Power 2ct's with plenty of life left.

Issues include some very minor road rash on both plastic gas tank shrouds, exhaust cans, and passenger pegs. The frame, motor casing, and tank are untouched. Looks like a very low speed lay-down from previous owner. The bike has never been down while I've owned it. The oil sight tube has a small crack in it which is VERY common but I've ordered a non stock replacement Tygon tube that should keep it from happening again. I sealed it with gasket seal so it's good for now but should be replaced. The gas line quick disconnect broke during service so I replaced it with a simple double ended barbed setup with hose clamps on both sides. Plenty secure just doesn't look as trick as the OEM setup. Lastly, while working on the carbs (went up one jet size on both front and rear cylinders and increased the idle air-fuel mixture a bit), I pulled the wire leads off of the gas gauge so the low fuel indicator no longer functions. A new gas gauge sensor is ~$50 from Munn Racing.

Just finished up with grad school so I can no longer count on student aid to feed my motorcycle addiction therefore my baby must move on to another owner. Please feel free to email with questions and I'll get back to you as quick as I can.

Price and location: $5000 OBO, Greenville SC

Colin S. (cstevens711@hotmail.com)

asking $1800.00 obo for everything

Complete rear tail light

Passenger seat with latch system

Ram intake covers

Right and left mid side panels

Right and left lower panels

Complete Upper clip with mirrors, complete headlight assembly, speedo, blinkers, stay, wind screen and inner guards

Stock rear shock

Complete kickstand

(3) Extra regulators

Power commander

Extra speedo with pig tail

Complete subframe

Rear wheel with sprocket and rotor

Complete radiator

Right rear set with rear caliper (complete)

120F 180R, have about 4 trackdays on them and 90% tread left. V front, C rear. Would make great street tires.



$75 firm.

Hi all,
I have a set of barely-used SRJL-XX. These have 3 sprint races on them, I'm only selling because I found I prefer the standard SRJL-17's. These things retail for over 200.00+ a set. These will only set you back 100.00 + 10.00 shipping. No pics yet, I'll put them up later when I get home. They look like barely-used brake pads :)

-Ryan

All items include paypal and Priority mail shipping. Feel free to contact me via PMs if you have any questions.

Alpinestars 1PC RC-1 suit 48 US/58 EURO - $725 shipped

Brand new, never worn. Bought it for this track season, but my schedule doesn’t allow me to do ride much this year. I’m 6’, 200lbs and this suit fits good with some breathing room.

Suit Pic 1
Suit Pic 2
Suit Pic 3
Suit Pic 4

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SHOEI RF-1000 Caster Red Small - $240 shipped

Brand new in box, comes w/ box, bag, manuals, neck and fog guard.

Helmet Pic 1
Helmet Pic 2
Helmet Pic 3

Hi guys I'm selling a Pro-Bolt Fairing Kit for a CBR900 Fireblade 98-99 on fleabay.

PRO-BOLT FAIRING BOLT KIT CBR900 FIREBLADE 98-99 PURPLE on eBay (end time 12-Sep-10 19:27:07 BST)

Come and grab yourself a bargin..

2001 Honda F4i Parts bike 8000k miles were on the bike. All prices are obo. Located in Concord, CA will ship on your dime. I work all over the bay area and I commute from Oakley to concord multiple times during the week. TEXT/CALL 925-890-6643 I don’t go on these forums much. First come first serve


Front Brake Master with cut lever/back of bracket is broken - $30.00

Front Master off a 03 600rr NO LEVER $50.00



Front Axle - $20.00



Rear Axle - $20.00



Top tripple/fat dirt bike bars/risers - $100.00



Good Battery/Tray - $30.00



Rear Caliper Bracket - $15.00



Good front calipers no leaks with good amount of pad left- $80.00



Rear Caliper with good amount of pad - $30.00




Front wheel with little road rash - $100.00



Front rotors straight - $80.00



Rear wheel straight with rotor power race tire 2/32 tread - $150.00





Ignintion switch (with zinar diode and resistor) - $20.00



Tripple and headset - $20.00




Passanger pegs - $35.00





Rear shock and resi -$10.00



Swingarm straight - $30.00



Tailight -$5.00



R6 PARTS

Bent fork good for internals? $10.00



Stock sprockets - $15.00

TRACK ONLY - NOT STREET LEGAL.
TRACK ONLY - NOT STREET LEGAL.
TRACK ONLY - NOT STREET LEGAL.

- Kibblewhite stainless valves, ti springs, seals, all of their kit in the head.
- Cylinder Works 480 kit with 13.5:1 comp piston.
- Beringer 4 piston brake setup
- Black Excel pro series wheels with Bridgestone slicks
- FMF can.

Fresh motor, under 10 hours. Starts/runs great, every time hot or cold. Comes with parts to put back to dirt trim. No trailer queen but it's a clean bike {for a dirty bike }, no surprises.

SERIOUS INQUIRES ONLY, somebody please buy it before I kill myself.

PM or email, STATTY "at' MSN.COM

SBS Dual Carbon Brake Pads (total of 4)

I didn't do enough homework on these pads. These are more for advanced riders which I am far from being. I put them on and rode around for 10 minutes thinking I could break them in on the street but was scared sh-tless when I couldn't stop so I went home. I have receipt to show you that they have been just ordered from Sportbike Track Gear. Installed with rubber gloves so no oil or any residue on them.

My stupidity is your gain. - $40 (shipped)

have an 04+ gel seat ($85 shipped)

and an 03+ passenger seat (make offer)

both in good shape. pics upon request.

i have a two brothers slip on for 06 / 07 gsxr 750 and 600 pipe exits by rear passenger peg. No rash at all only issue was it cracked by the mounting bracket and has been welded no leaks cant see it when mounted on the bike


$115 shipped takes it

I have a basically brand new alpinestars halo leather jacket that i would like to sell i ahve worn this jacket maybe 10 times and its in brand new condition i jsut find that i dont have a use for it.. The jacket is a euro size 50-52 i cant remember but it equals out right between a us mans medium or large its righ ton the line for sizes. This jacket new retailed for $400 I am looking to get $225 obo for it if you have any questions please email me or contant me through the forum i am a motivated seller so dont be afraid to offer..thanks chris

email: int3gra_kid@yahoo.com
Attached Images  

I'm selling my Infinity suit. It doesn't fit me right and the time for me to be able to get the proper size has long since come and gone. I wore this suit maybe 3 hours total... MAYBE. It's still brand spanking new! It is a size large standard and to check your sizing go here

Special BARF price of $900 which is $400 off retail. I hope someone here can make good use of this. It's a great suit. I'm still POed at myself for not dealing with the sizing issues immediately. :mad

Sorry, I didn't include the size in the title... mods? :teeth
Attached Thumbnails     

2007 GSXR 600!!!!I have a 2007 gsxr 600 that i need to sell!! It is brand new has under 50 miles on it, it has been professionally lowered 1.5in in the rear and .5in in the front so it sits very level. it also has a shaved seat that takes another inch off of seat height (comes with original nonadjusted seat as well) , other than that I installed a fender eliminator and powers stunt works race railz to keep it protected! also comes with rear seat cowl. the bike is all black and in perfect shape!! I am not looking for any trades so please dont offer that, I just want the bike to go to someone who will actually ride it since I dont. I would like to get $7000 for it but the price isnt entirely firm so if you have an offer please let me know and maybe we can work something out. I need to get this bike gone its taking up space in my garage and its never riden!! please email me through the forum or at.. int3gra_kid@yahoo.com thanks chris
Attached Images  

I have a brand new ASV BRC520-sk brake lever for sale. Click this link for installation instructions and applications: http://asvinventions.com/TechSupport...ONS_BRC520.pdf

Please note that the brake light switch tab is not included, so if you want to install this on a Honda bike, you will have to buy it from ASV if you plan to use on the street. I am looking for $80 shipped OBO, but any reasonable offer won't be refused. Retail on this is $125. Thanks

Selling this for a friend. It's sitting in my garage and I'll get pictures later. Leo Vince Full Ti exhaust $900

We'll have the exhaust with us at Barber this coming weekend. Located in East TN.

It's the Titanium can with the carbon end cap.

BRAND NEW in box Honda RC51 Hindle hi mount mid pipes in box. Maybe $80? Not sure, shoot me an offer PM.

No damage, no rash, no scratches. OEM stock exaust off a Ducati ST3. Was thinking $99? Shoot me an offer on PM.

Used rear hugger off a ZX6R 05-06. Carbon Fibre look. Small nick on the top ridge as pictured, otherwise great. Was thinking $60? Shoot me an offer on PM

Hate to do it, but it's time to take a short break from racing.
05 gsxr 600:
Hot bodies Race glass
quickshifter
Ape manual cam tensioner
Leo Vince full exhaust
Woodcraft rearsets
New Penske rear shock, around 1000 miles
Penske .90 internals, refreshed with new valving about 500 miles ago.
Hinson slipper clutch
520 chain conversion
Suspension did OK when I was 210lbs, works great for me at 180lbs now.
More I'm sure......
Bike fell off the trailer at Road Atlanta last year, scratched and dented the tank and exhaust. I also low sided it in Feb at Homestead, ground right foot peg and slider, but didn't feel the need to replace them. All visible in rider's right pic view.

Extras:
Front and rear wheels
Motor with 7000 miles, and an Ape tensioner
Spares motor (knocked and couldn't find problem, everything still there)
Spare windscreen
Spare clip ons
Spare rear set parts
Front and rear Pitbull stands (front is triple tree stand)
Pitbull trailer restraint with pins for this bike only.
Podium racing tire warmers, front has some damage, but both work fine.
Extra set of warmers bought on wera forum, never even plugged them in.
Full set of 520 sprockets
Probably more......


1994 TZ125:
Here's the original listing from when I bought it. I've got the new 0 mile crank in it, it's got 100 miles or so and I've done 1 top end rebuild. Rest of the spares are still here and go with it.
-1994 TZ125
-Black powder coated frame, swingarm, triples, etc.
-Gold anodized fork shells and chain adjusters
-Black anodized fork tubes
-Marvic magnesium wheels
-WP rear shock - 4 race weekends since full rebuild, two springs (need to look at the rates)
-Wide bodywork - manufacturer unknown to me
-MCE Racing tail
-Rairotec rear sets
-Rairotec rear master cylinder
-Over radiator airbox with solenoid, throttle sensor, and control box to equalize pressure with fuel tank
-Phoenix 4 piston monobloc caliper
-Oversized front rotor
-Carbon fiber front fender
-Freshly repacked silencer (not in great shape though)
-New Shindy steering damper
-MRP Quickshifter (not currently working, don't know why, all the directions are in German, switch on dash is to turn it on and off)
-MRP Shift Light (also not working, can't understand the instructions)
-New Condenser
-Forks have a full season on since rebuild with .64kg/mm Traxxion springs.
-Starter nut

-Engine
-Completely rebuilt at 1/2 through last season
-All bearing in the transmission have 1/2 season and 3 weekends on them
-Rebuilt crank, new crank seals and main bearings installed at beginning of this season and has around 500 miles on it now
-Cylinder freshly replated installed at beginning of this season has around 500 miles on it
-Piston, ring, pin, bearing, clips replaced 100 miles ago
-Kit head
-Clutch plates new at beginning of season

-Spares
-Set of Marchesini wheels with rains and rotors
-Spare fuel tank
-Full selection of gearing
-Full selection of jetting
-Spare 0 miles rebuilt crank
-1000 mile crank, usable
-Freshly replated 4JT cylinder 0 miles
-Used 4DP cylinder x2, both usable but have scoring
-3 Heads Stock
-1 Kit Head
-Many gaskets, bearing, o-ring, seals, etc will get a list together
-5 Rings
-3 wrist pins
-3 small end bearings
-4 pistons (A,B,C,D)
-4 used pistons
-10 cirlips
-Intake manifold new
-Spare levers, pedals, clip ons, fairing stays, etc.
-Spare chain x3
-stock front caliper
-spare pipe
-spare clutch plates new (Very Expensive now, 3 times as much as 250 plates)
-used clutch plates and pressure plate
-Front stand
-rear stand.
-Sidestand

$4000 for the GSXR and all spares
$2500 for the 125 with all spares
I'll also be driving from Miami FL to Lexington, KY around October 20th and could deliver anywhere along I-75 free of charge, as long as you meet me near I-75.

I've also got an 06 R1 streetbike that used to be my racebike. Painting it right now. Pics on request. 17,000 miles. Angel eyes headlights, flush mount turn signals, integrated tail lights, more I'm sure....
$3500.
Same offer on delivery.
PM for phone# if you have any questions.
Attached Thumbnails     

Unfortunately I have been unable to ride my bike due to employment changes/lack of health insurance for the past 6 months and I am tired of just seeing the bike sit in the garage.

The bike has approx 2100 miles on it and is very clean. The bike is in the Black color way and has never been dropped. The bike is in stock trim, with the addition of tech spec tank grips and rear spools.

I should have some decent quality pictures up within a week, but if you need one right away, pm me and I have a few lower quality images I can send you.

Let me know if you are interested via PM

Price is $8000

2006 cbr 1000rr. salvage title.16xx mile 3800.00 needs nothing but a rider
314-450 6699

I have a red probolt accessory kit for sale. The kit states it will fit 05-06 600rr and I know some parts also fit 07+ 600rr. This kit retails for $250. Kind of steep for a bunch of stuff to pretty up your bike. BUT, you can buy mine for $150 shipped. I will also entertain offers from people who would like to buy individual parts. Just shoot me a reasonable pm and we can talk. Here is what is included with the kit:
valve stems
preload adjusters
spools
bar ends
sprocket nuts
oil filler cap
reservoir cap
chain adjuster blocks
cable adjuster
gear shift rod
20 misc bolts for use wherever





cheers :drunk:

Cleaning out shed and came across these items, more to come but for now I'll post up three. Let me know what you need. I'll post a list later... :thumb:

01.2003 VFR Bars, Nice shape w/weight mounts attached $170.00+Shipping

02. Givi Sport/Tour Windscreen, Nice shape no major scratches, small ones should buff out. $50.00 +Shipping (Light Smoke Tint)

03. Moto777 Kit Front Fender (Blue) New, Never mounted bought it to compare different kit colors. $50.00 +Shipping
Attached Images 03 VFR Bars1.jpg (99.0 KB) CBR Givi Tour2.jpg (78.5 KB) CBR FFender2.jpg (80.3 KB)

Selling my 2005 R1. I don't have enough time to ride and we have a baby coming next month. It has a little over 16k miles and runs great. It has a few scratches from being knocked over by previous owner.
New rear tire has less than 1000 miles, probably need to replace front one soon.

Please email me at ch0sen713@gmail.com

Brand: Helimot (custom suit)
Model: "Helimot Pro" - 1-Piece
Color: Black w/white accents (great neutral colors go with any bike!)
Condition: Brand New (worn once)

Sizing: (for ideal fit)
- Height: 6' - 6'1"
- Weight: 185 - 200lbs
- Chest: 41-43"
- Waist: 33-35"
- Inseam: 33-34"

This is a brand-new, custom-suit, that originally cost over $2,200.

Due to sizing differences, it's being offered for sale to save $1,000+ for someone of the appropriate dimensions, that's looking for a top-of-the-line model Helimot suit!

Sale Price: $1,200
Attached Thumbnails    

Have a Honda CB350 Twin that has been raced in WERA Vintage class. Bike has custom paint job, and clip on handlebars. The motor is currently out of the bike as I was going to repaint the frame, but like any project, time has gotten away from me. Want her to go to a good home, can be made street legal again very easily. Comes with spare CB frame, spare gas tank, and a box of a couple spare parts. $1400 OBO - don't hesitate to make any offers :up:
BIKE IS ABOUT 45 MINUTES FROM ROAD ATLANTA IN CUMMING, GA

pictures: http://atlanta.craigslist.org/atl/mcy/1941105008.html

Selling my 2005 Kawasaki ZX6R 636. I hate to sell my bike but it has to go. I can no longer afford it with all the tickets I got and the court fines I have to pay for. I am the 2nd owner of this bike and I have cared and babied this motorcycle. I am asking $5000.00 obo. This motorcycle runs very strong and is very fast for a 600 class bike. Before installing the bmc race filter and the power commander this motorcycle was dynode at 106.5HP to the rear wheel (with a very dirty air filter) and I think I still have the dyno sheet somewhere to prove it. This motorcycle (with all the upgrades it has right now) is probably (if not more than) 115.00 hp to the wheel. Below I have a list of the mods/upgrades that were done to my 636

Clean & Clear Title in hand
10XXX miles
Full Leo Vince exhaust
Bmc race air filter
K&N oil filter with full synthetic oil
Jumper Mod
PCIII with a custom map
Integrated led taillight
Flush mount front turn signals
Lowered with vortex dog bones
Rear Tire Hugger (Currently off since the bike is lowered and it cracked)
Chain and sprockets have less than 1k miles on it
Water Wetter
Michelin Pilot powers with less than 200 Miles on them
ZX Frame Sliders
ZX Handlebar sliders
Attached Thumbnails