For Sale by foxgrl - http://pnwriders.com/users/foxgrl/

This is Angie's bike and she asked me to post this for her.

Please do not contact me about this vehicle. Thank you.


2007 Blue Kawasaki Ninja 250

This is a great bike for beginners and those that want great mileage.

This bike has 3654 miles on it and is in excellent condition too.

Asking: $2250

Contact Angie at: 509 270 9590

Current tabs expire: 07/05/2011

This bike is in excellent condition other than the seat cowl (ill explain later). I bought the bike from the original owner with only 2752 miles on it. The chicken strips were about an inch on each side of the tire and there was a huge flat spot. This Z has been babied. The first day I owned it I rode it 650 miles back home. Only stopping for gas and food. It runs like a top. I've never had any problems with it, but what would you expect from a bike with under 6,000 miles. I just put new tires on it, that was the only thing it needed. I have done some cosmetic mods to it, but I have all the stock parts that will go with the bike. This thing is an absolute powerhouse, not for noobs. I learned on an SV650, then stepped up to this. I am a cautious person and have been able to handle the power difference just fine. Keep it below 7K and it's a pussy cat. You turn it up, and this thing goes into warp speed. I am asking $4500 or trade for a V-Twin sport bike like an XB12. It has a clean title and recent tags.

The seat cowl flew off of the bike on I5. I thought it was latched down, apparently not. It's not too bad, but it's not perfect either. I have it on the bike now. From 10 feet, you can't tell. Ill get a picture of it later.

This bike is in excellent condition other than the seat cowl (ill explain later). I bought the bike from the original owner with only 2752 miles on it. The chicken strips were about an inch on each side of the tire and there was a huge flat spot. This Z has been babied. The first day I owned it I rode it 650 miles back home. Only stopping for gas and food. It runs like a top. I've never had any problems with it, but what would you expect from a bike with under 6,000 miles. I just put new tires on it, that was the only thing it needed. I have done some cosmetic mods to it, but I have all the stock parts that will go with the bike. This thing is an absolute powerhouse, not for noobs. I learned on an SV650, then stepped up to this. I am a cautious person and have been able to handle the power difference just fine. Keep it below 7K and it's a pussy cat. You turn it up, and this thing goes into warp speed. I am asking $4500 or trade for a V-Twin sport bike like an XB12. It has a clean title and recent tags.

The seat cowl flew off of the bike on I5. I thought it was latched down, apparently not. It's not too bad, but it's not perfect either. I have it on the bike now. From 10 feet, you can't tell. Ill get a picture of it later.

My boss man said we need to sell these bikes so we can start breaking ground on the new building. Here is what he needs to sell and the prices:



2010 Husaberg FE 570 $8000
2010 KTM 150 XC $5900
2009 KTM 450 SX-F $5500 (Demo)
2008 KTM 250 XCF-W $4500 (Demo)
2006 KTM 250 XC-W $3200 (Used)


2008 KTM 990 Superduke $10,000 (Demo)

The Superduke is his lol hence the frowny face. He NEVER rides it. I don't know how many miles are on it but it had 600 on it when he got it and I bet it's still under 1k miles. I can check if anyone is interested. It has a FMF carbon fiber pipe on it and a corbin seat.

Every bike other than the Superduke can be seen at Appalachian Offroad MC here in Cross lanes. There is a deal for the new bikes for like KTM bucks or something. Like $500 or something? I can't remember...

Or if you're too lazy to drive up here I can get pics.. but every bike other than the '06 looks brand new. The Demo bikes are all redone and stuff. And if the '06 is the one i'm thinking of it's not stock. It has a few aftermarket goodies on it.


And my husband still has his '08 250 SXF for sale! Muscle Milk edition... Very few hours on it. $3,500 no lower since we owe more on it.


If you want to talk about a bike you can call me (Nikki) here at work 1-866-663-4817 or e-mail me at Nikki@ktm-parts.com that'll get to me quicker than on here. I check the e-mail constantly

Just what it says, I have one. . . . . . . . . you need one? Just pay the shipping. Please send PM's.

Practically new, for both sides of engine.
Retails for 255US$
Asking 190$ OBO
Attached Thumbnails  

I have two sets of velocity stacks available for free to anybody wanting to do the short stack mod. Please spread the wealth and only take one set for yourself so someone else can get the other. Just pay the shipping and they are yours. No pics needed as they are mint and you guys know what they look like. PM's take priority not dibs in the thread. Thanks guys.

This came off my 2009 GSXR 750:

WINDSCREEN
Asking $30 or BEST OFFER:



This part came of my 06 GSXR 600:

PASSENGER PEGS:
Asking $40 or BEST OFFER



PLEASE CHECK ALL PARTS ARE COMPATIBLE FOR YOUR BIKE BEFORE BUYING!!!!!

I have three OEM parts for sale that came off my bike:

All prices are asking or BEST OFFER!!!!!!



Stock wind screen $30


License tail assembly $40


Stock brake light: $30


Thanks!

Up for sale is a set of 2003 CBR 600RR rims front and rear. They will come with a set of tires on them rotor included on both with the rear cush drive. Both rims are straight and in excellent condition. May fit other year 600's but not sure. Asking $350 for both you can text me at 951-707-9335

Was used on my RGV (direct fit) but with the new subframe it doesn't fit the oil tank. Very low miles, I'd guess no more then 5k.

$75 shipped in continental USA.



PM me!

I have both available and only want to sell one.

Vortex ( All Black ) Condition is 8.5 out of 10. $250 + Shp
Gilles VCR38gt( All Black ) Condition is 8.5 out of 10 $375 + Shp

This is what the gilles look like
Gilles VCR38GT Rear Sets - Honda CBR 600RR (2007-2008)

This is what the vortex look like
Vortex Adjustable Rear Sets - Honda CBR 600RR (2007-2008)

Please PM me, Vortex are available NOW. Gilles available after Homestead this weekend.

V front B rear 120/190 one practice and two sprints on them. Pics will be up this afternoon $175 shipped firm.
Thanks Curtis

I have a card good for 1 full lapping day at HPR - "bikes only". Unfortunately, I won't be able to use it :(.. soooo, my loss is your gain!
I'm sure someone could really take advantage of this! HPR is a fabulous track to ride so if you haven't had the chance to get your 2 wheels on it, check it out!:bananna:

Check here for calendar information: http://www.highplainsraceway.com/events.html

Full days are $150. I am asking $100, what a deal!! :)

I have a mint condition solo rear seat cowl off my 2007 SV650. Its the blue color, paint code YKY. This is a Genuine Suzuki Accessory, not aftermarket. Includes all mounting hardware to bolt right on. Works great and looks great, nothing wrong with it at all.

Asking $65 shipped to lower 48 states. I ship fast and you will get a tracking number.

The part number is shown below and the link shows you what it looks like.

SV650/S 2007 BLUE 45500-16861-YKY
http://www.oneidasuzuki.com/store/pa...2003-2006.html

Brand new, never worn - size large.

$175 shipped

Hey guys and gals, looking for a uncut main wire harness in good condition for a 07 suzuki gsxr 600 i dont need the rear or the headlight portion just the main harness. email me with offers and a picture preferably at john_borkowicz@hotmail.com

thanks

Ex250

05-06 zx6
07-8 zx6

08-09zx10

03-08 sv650
04-05 gsxr 600
06-07 gsxr 600
07-08 gsxr 1000

daytona 675
07-08 r1

06-07 cbr 1000
05-06 cr 600

07-10 cbr 600

998 ad 999
1098

I've got some factory ducati monster parts i'm lookin to sell. Prices are OBO plus shipping to your zip. These are used but in great condition; no scratches or damage. These appear to fit monsters from 01- fwd. The black are from my 04 800M and the red fender is from my 06 S2R.

Front Fenders/Mudguards (black & red): $35 each
Windscreen/Fairing (black): $50

My ebay ID is the same and I have 100% positive feedback. Thanks for looking.
Attached Images IMG_0816[1].jpg (94.7 KB) IMG_0817[1].jpg (95.0 KB) IMG_0835[1].jpg (94.2 KB)

im asking 140 OBO shipped for each of these. nothing wrong with either of these parts, just upgraded awhile back. the exhaust has been shortened but it looks factory. it has very minor blemishes (can be polished off or resurfaced), nothing really to care about. the 1st pic is from this morning.

[IMG][/IMG]
[IMG][/IMG]

2009 Honda CBR1000RR, pearl white/black, clean, unmolested, 2415 miles, 600 mile service was performed, all stock, will come with Guardian bike cover, 2 keys and owners manual. It kills me since I got it recently but I need to free up some money, gonna buy a house so the toys gotta go. Not interested in trades, cash only.
$7900
grzesiu@sbcglobal.net

I would like a rear shock for my '05 SV650 that will be a direct swap (no cutting) like an '06-07 ZX10R. Let me know what you have...Thank you.

Hi all, I am selling my 2003 Kawasaki Z1000 with custom paint, some nice modifications and just over 14,000 miles. It runs great and looks great. Some of the mods are 2003 ZX-6R front forks with Ohlins .95 springs, ZX-6R front calipers and front fender, Zero Gravity tall touring windscreen, full Muzzy 4-2-1 stainless exhaust, Power Commander III USB, bar end mirrors, 520 chain conversion, frame sliders, Clear Alternatives integrated tail/turn signal lights and ZX-6R rear shock. It has has the reflectors removed along with the rear fender and license plate holder to clean up the tail.

I also have some extras that come with it. I have the stock Z1000 front forks, calipers and fender, stock rear shock, rear fender, taillight and turn signals along with a second red drivers seat, black passenger seat, tank bag, rear spool stand, front fork stand and stock exhaust. I also have the stock ZX-6R springs. There may be more that I'm forgetting I will dig it all out and take pics if I have some interest.

Custom paint isn't perfect, but still looks really good. There is one bubble in the paint on the side of the gas tank. The bike does need the fork seals replaced, I have the seals and dust seals. I will be changing the oil and filter this weekend. It has a small leak around the valve colver gasket, but I have a new one and will be replacing that as well this weekend, so it should be fixed and cleaned up.

The bike has been run on the track, and while its no supersport, it is a capable track bike for an enthusiast. It has been down and has rash on the sliders, swingarm spools and engine cover, but have never had a problem with it. I have replaced both of the case slider inserts as the old ones were a little rashed. Since I ran it on the track I actually made a custom front bikini fairing molded off the light bucket. So you can remove the lights and fairing and put on a "race fairing" of sorts. I can get pics of it if you are interested.

You are welcome to come see the bike if you are in the area. Clear title in my name. I prefer cash, if you pay by check the bike and title will not be released until the check clears which could be a few days.

I know this is a race forum and street bikes don't sell well so I'm not expecting miracles, just throwing this out there. I will consider trades for a street legal supermoto.

I'm asking $4,000 and the bike is located in Hattiesburg, MS but I will deliver up to 2 hours from here.

Since I'm selling my bike, there's no point in keep this gem. I bought the header used off of a member here locally. Unfortunately, the seller failed to tell me that he had made some dents in the 4 primary runners, most likely upon his fubar'd attempt to install the header. I didn't notice until weeks later when I got around to wanting to install it. By that time I had considered selling the bike, so I never bothered to take the bike apart. The good thing is that the dents aren't bad nor will they affect airflow. From what I can tell, the header has probably 1-2 starts on it... if that. There isn't any carbon buildup.



Wrong replacement parts sent to me (to be included):



Pics showing the 4 primaries (they look at lot worse in the pics):






I also realized that 2 of the bushings were fubar'd upon the previous owner's install attempt. I tried ordering two from a sponsor here but was sent the wrong parts. Buyer will need to contact arrow directly and order 2 pieces of part number 26 off of the following parts fiche from arrow:
http://www.arrow.it/oggetti/3441_Hon...07-08%20PO.pdf



You can see that the following two bushings have bends in them:



The other two are good:





I'm looking to get $310 shipped for it. Nothing is missing (instructions not pictured) and I've been as clear as possible so that the you will not be misinformed and everything will be as stated when you receive it. If there are any questions or need for clarification on anything, please don't hesitate to contact me. Located in Germantown, MD if there are any locals who are interested, and I'll knock off $20. Thanks!!

i have an l.e.d. tailight with built in turn signals....got a pimpbike tray...make offer and also i have some red bar ends and red slash cut pegs ill let go cheap

I am looking for a set of Yoshi headers for an 06 R1 and headers and mid pipe for an 08 R6.

brand new never used... $100 SHIPPED... PM ME IF INTERESTED...

Wanted

After market exhausts, not to fussed on what they are just as long as they are loud and in good condition (good sound not to worried bout HP gain), plus need then posted to uk (northern ireland)

Thanks
Andy

Perfect bike for beginner wanting to start track days and also ride on the street.

Bike has a little over 2000 miles on it, and was bought new in 2008. Black/Black model. This bike has done 3 track days at Jennings and comes with all necessary gear and equipment to do track days and ride on the street. I'll throw in a Jennings trackday certificate as well. Never been down and is in perfect condition. Vortex sprockets, case covers, Scorpion exhaust, K&N filter, NGK platinum plugs, and ECU work done by dealer. Runs incredible, and well maintained. Also included:

Pit bull stands
Race leathers (used)
Alpinestars Boots (11)
Gloves
Helmet
Tire Sox warmers
Race plastics with all hardware and Z.G. Windscreen

Want to sell everything at once, all for $7500

Seller from Lakeland Florida (863) 698-5952

Stock parts for a 2003 GSXR 1000

-Stock Windscreen

Stock "can" of the exhaust pipe

-Stock tail light plate with back turn signalsX-small HJC helmet

-Black

-Bought in 2007

-Never crashed in

-small scratch on left, back side

-Has clear and tinted visor






You name the price, we'll negotiate.

Thanks!