'1098'

Ex250

05-06 zx6
07-8 zx6

08-09zx10

03-08 sv650
04-05 gsxr 600
06-07 gsxr 600
07-08 gsxr 1000

daytona 675
07-08 r1

06-07 cbr 1000
05-06 cr 600

07-10 cbr 600

998 ad 999
1098

Parts for sale, all proces are OBO:

2003 800SS
Body panels
-Right upper, has small scuff/crack at the turn signal mount, $50
-Left lower, excellent condition, $200
-Left upper front, excellent condition, $200
Clutch cover, black, excellent condition, $50

2006-2007 ST3
-Ducati Performance ECU, new in box, $500

916/996/998/748
Front fender, CEnter fairing, make offer

848/1098/1198
Left side mirror, $40

1999 996 Frame and Subframe, Clean current title, $400

Carbontech slip-ons for 996, $150

Pics to follow
Attachment 348382 Attachment 348383

Attachment 348384 Attachment 348385

Attachment 348386
Attached Thumbnails      

brand new sealed in the box never mounted never used. need to move this stuff to make room for other stuff i want/need. all prices are firm and include shipping in the continental US. you will NOT find a lower price on this stuff anywhere else. If you know anything about Attack Performance parts at all, you know that they are some of the best made performance parts made in the US. Same exact stuff that is used in the AMA.

Rearsets (all of these are adjustable and complete; incl shifter):
06-10 YZF R6, gold. 295
09-10 YZF R1 gold. 295 - took these out of the box for ap picture
07-10 CBR 600RR gold. 310
08-10 CBR 1000RR gold. 310
05-10 ZX6R black. 280
04-05 GSXR6/7 gold. 280
09-10 GSXR1000 black (2). 295
09-10 GSXR1000 gold. 295
07-10 1198/1098/848 black. 350

Swingarm lifters:
06-10 YZF R6 black. 100
07-08 ZX6R gold. 100

Triple Clamps (upper, lower, and stem):
05-08 ZX6R silver. 50mm can be used with stock forks. 550
07-08 GSXR1000 black. 580

Clipons (2 sets):
50mm black. 150

If someone wants everything, only $4500.

brembo monoblocks with good PF pads $600

showas with 25mm ohlins cartridges - some rash on lower fork $1500


woodcraft clipons $75

speedymoto underbody slides - pre-crashed, $75


motor, airbox, fuel injectors - $2000 stock, 5k miles, lighter flywheel.

I have 2 upper fairings stays that have been repaired. One left lower red that is very nice, new throttle tube with grip.clutch lever that had a scratch on the end. left bar NIB. headlight with very light scratch on the corner.
100.00 for each upper fairing stay one is safety wired and then jb welded kind of ugly. one is safety wired on the inside and then filled with jb weld then sanded
75.00 for the lower it has 2 scratches one on the front lower corner and one by the kick stand return.
50.00 for the bar NIB.
15.00 for the clutch lever needs painted
100.00 for the head light scratched
40.00 for the throttle tube with grip NIB.
All parts a perfect for the street but will save you lots of cash if you are a track day freak with your big cash ducati. I will send you any photos of the items you want. just pm me with your email address.
Attached Thumbnails      

I have an 08 1098/848 tank for sale. its painted black comes with fuel pump, twist cap, and stomp grips. very good condition.

In perfect condition 150 shipped takes it

Justin
405-659-6364

call or text for pics

These are base 1098 wheels from an 07 model, so the wheels are made by Marchesini. I haven't used these wheels in two years since i got my forged wheels. They've just been sitting in storage and i figured it's time to clean up some space.

The wheels have red rim tape to make them look like the S model wheels, but they're easily removable. Wheels are in good condition but there will most likely be normal wear and tear.

I'm looking to get $850 for the set. Shipping is extra. Local pickup is available. I'm located in Somerset County, NJ.

Here are some old pictures of when i still had them on the bike:





Front rotors not included.

clearalternatives.com
retails 150$ im selling my brand new unused in the box set for 70$
get rid of stock rear lights with nice looking led lights.
Attached Thumbnails    Attached Images  

I have a complete set of E-Racings race body work i'm looking to sell. The set is painted flat black with yellow number plates. The rear tail has a small amount of damage from a low side, other than that it's perfectly fine. I'm looking to get 300$ for the entire set. If interested send me an email at rowe748@hotmail.com or give me a call at 862-219-1850.

Yoyodyne Quick Turn Throttle, fits Ducati 848/1098/1198

Brand New and Still In Original Packaging

Retail: $189

Sale Price: $105 (Free Shipping in US 48)

PM For More Details...thanks :up:

6" wide rear wheel, both wheels have fresh gloss black powder coating.
5 bolt front rotor wheel

$1200 w/o rotors, or $1450 with front rotors that are full floaters.

I have:

1098 race plastics (they have a lowside on them some scrapes and one crack in the lower. still very usable just need some paint. they are sharkskinz brand. i want 300 shipped.

1098 tank w/fuel pump, screw cap, and stomp grips the crash hasnt touched the tank. 600shipped

999 plastics (they have a scrape on the upper cuz it tipped on the trailer.) 250shipped

1098 rear stand. its reversiable and comes with an extra pin to reverse the stand. its 3 months old i want 150shipped

t-rex front stand i want 40 shipped

nxt lap timer. ive had for less than a year. i want 100shipped.

trailer/pit chock 120 shipped

New 6 position adjustable levers non-folding or folding
CNC - 6061 aluminum alloy, same as brand name levers
Available Lever colors - black, gold, blue, red, silver
Adjuster colors - black, blue, gold, silver and/or red
Non-Folding: Short or Long; Folding: STD length ONLY
Price - $65 per set non-folding, $75 folding set
Single lever or mix - $45/lever
Shipping - Priority ($4.95)
Payment (if shipping) - PayPal, CC, check (needs to clear)
Contact - sales@bohemianracing.com
Note - Red is sort of Magenta/Red (see pics for details)
Available for - 600RR, 1000RR, 954RR, RC51, GSXR600/750, GSXR1000, TL1000R, SV1000, Hayabusa (99-07), Bandit 1200/1250,
R1, R6, R6S, FZ1, ZX636R, ZX6R, ZX9R, ZX10R, ZX12R, Z1000, ZZR600, SV650, GSX1400, Aprilia, Ducati (748, 749, 996, 998, 916, 999, 1198, 1098, 848 etc.)

FS Brand new CRG Levers short dealer drop the right lever on the end tip which they order me a new one. The paint came off as showed in the pic. This lever will fit MONSTER S4R/S4RS, MONSTER 1100, 749/999, 848, 1098 and 1198. I'm asking 120 plus shipping for the set.


www.freeimagehosting.net/uploads/7d878d1e92.jpg

I have a single sided swingarm pit bull stand that I used for my 916 and no longer have a use for. It has some use not brand new but has the interchangable pin for other Ducati except 1098/1198/street fighter. will post pics tonight.
pm if interested

$100 OBO

848/1098 Corsa Race Bodywork - This set was used as a back-up set of bodywork. This set has never been crashed. The lower was patched on the side due to it rubbing on the track.It has a professional paint job on itand looks good, but has rock chips in the lower from track use.

As shown in the pictures, the following pieces are included:
Upper
Lower
Tail section


Email me at jrockcolors@yahoo.com or PM me . These pics are kind of small I can email better pictures.
$700 plus shipping.
Attached Thumbnails      

Lots of extra goodies up for sale, enjoy:up:

1098R slipper clutch $550 (1500 miles)
848 brembo calipers, NEW $350
749/999 showa forks, Ohlins UES kit, fresh rebuild $400
749/999 lower triple and stem $150 (showa forks)
749/999 4 pad calipers $300
Brembo RCS master cylinders (Brake 19, clutch 16) $250 each w/reservoirs
Ohlins DU301 triple adjustable shock, $750
Pierbon racing fairing stay $150
Corsa bodywork (nose, sides, belly pan) professionally painted red $500
Ohlins steering damper $300
Nemesis ECU and quickshifter $1300
749s clear title frame $800
749s motor, 6K miles $1200
Carozzenia forged aluminum wheels, black $1300
Siebmoto carbon air intakes (larger) $400
Acculine rear sets $300
Gilles chain adjusters w/GP lift $110
Euro Racing quick throttle $200
999 fuel tank w/pump (red) $400

TAftonomos at gmail dot com

cleaning my garage again have stuff ive just collected last few years that can either be of use to some one or will end up in the trash
you can text me @ 951-707-9335

Ducati 1098/1198 gauge cover, rear seat, rear sets, clutch cover, and misc nuts and bolts $100 OBO



Honda CBR 929/954 clutch cover $40 obo

2006 GSXR 600/750 magnito cover with stator $40 obo

cleaning my garage again have stuff ive just collected last few years that can either be of use to some one or will end up in the trash:rolleyes
you can text me @ 951-707-9335

Ducati 1098/1198 gauge cover, rear seat, rear sets, clutch cover, and misc nuts and bolts $100 OBO




Honda CBR 929/954 clutch cover $40 obo


2006 GSXR 600/750 magnito cover with stator $40 obo

pics would be appreciated.

Triple clamp kit. Used, but in great condition. $600. Should fit Ducati 916 and every model after that.

Ross Delong

253-377-2335
Attached Thumbnails  

hello barfers and ducati owners i have a 1098 race ecu for sale askin for $300.00 retail price is $1000.00 p/m thank you all have a nice day ride safe...
:thumbup

848 Ducati Marchesini wheels black 17", new in box $2000 shipped, price is firm.

rear wheel is 6" front is 3.5"
Attached Thumbnails  

i have a 1098 USED termi race ecu up for grabs anyone interested? let me know retail for the ecu is $1000.00 im selling it for $300.00 p/m me..

SpeedyMoto Ducati 1098 1198 rear axle socket. BRAND NEW, NEVER USED. Decided to sell the bike before I ever needed to use it. Can't return it because I opened it. $55 shipped, Paypal: matthaven (at) insightbb.com

http://www.speedymoto.com/Merchant2/...gory_Code=9SMT
Attached Thumbnails  

2001 Ducati 748 Frame with clean and clear TN rebuilt title. 12k miles were on the bike when dismantled. There are scratches in the paint on the back spar (as pictured) from a chain breaking and scratching it. A repaint and the frame is as good as new or ride as is. 100% straight. Being that this is an '01 it had the larger diameter engine mount bolts so the 998/999/1098/1198 will all bolt in but require modification to the middle cross bar for throttle body clearance. $500 obo

Hi all,
Selling my EVR slipper clutch - fits 999/1098/1198

Black EVR slipper with 9 days at the track on it ~450 miles per my odometer. The clutch pack, basket, everything in excellent shape.

Also included are EVR stainless springs and EVR gold spring keepers

These clutches are $1349.00 new + $49.95 for the spring kit.
http://www.bellissimoto.com/EVRClutchParts.html

$895 shipped.
Attached Thumbnails      

This is not my bike I dont know the guy. I talked to him about his bike but it is not something that I want to deal with right now. I know someone here could use some parts.
http://pittsburgh.craigslist.org/mcy/1753420439.html

Listed on eBay with No Reserve Price:

07-10 DUCATI 848 1098 1098S AKRAPOVIC EVOLUTION EXHAUST

For sale is this Brand New Akrapovic Evolution Full Titanium Exhaust System with Carbon Fiber Canisters. This exhaust system fits the 2008-2010 Ducati 848, the 2007-2008 Ducati 1098 & 1098S. This item is brand new in its original packaging and includes 72mm piping, two canisters, carbon fiber clamps, installation hardware and installation instructions. This exhaust system features removable baffles and the best materials and construction available. This sytem bypasses the factory servo motor.