Alpinestars ACR Air-Flo Textile Jacket

Color - Black
Size - Large
Condition - Used, EXCELLENT condition. Normal signs of wear on velcro straps. No scratches, tears, stinky smell, stains, or broken zippers. EXCELLENT condition. Also has a removable liner for colder weather.

* Multiple stitched main seam construction
* Removable and breathable long sleeve liner with water/wind resistant membrane
* Non water absorbing heavy mesh panels for ventilation
* 2 internal and 2 external pockets
* Adjustable sleeves, wrist cuffs and waist
* CE protectors at shoulder and elbow
* Precurved sleeves
* Internal waist zip attaches to pant
* Reflective piping
* Back protector compartment with a foam back pad (CE certified RC back protector available as accessory)

$80

email - ryanrafael83@gmail.com

Thanks for looking!!

This is what the jacket looks like, I'm selling the BLACK one. I only posted the red picture so people can see the details of the back side of the jacket.

Have pink slip in hand. Bike is stock except for upgraded handlebars. Asking $1500



Attachments    

Cleaning out the shop...
Super nice GIVI fairing with all the brackets. Color matched to the blue that is on most 03-07 SV's. these are about 250.00 new. 75.00 OBO.


Next is a Suzuki factory tank bra in like new condition. It has the carbon weave pattern molded into it and fits perfect. 25.00


Finally, this is a Top Saddlery tank cover with hooks for a tank bag. It is also a high quality item. It is a generic blue that doesn't exactly match any of the Suzuki blues but looks OK with any of them. They sell on ebay for about 225.00. $50.00 OBO.

Hey Guys looking for honda 929/954/rc51/60rr/1000rr forks for a front end conversion on a honda 919. Let me know if you have any forks I can take off your hands for you. Or if you have a front end that you want to sell. Thanks -Adam

For an S2R 1000 and may fit other bikes. All three for $200 shipped to 48 States. $130 for the levers, $70 for the stand. Not negotiable. Thanks
Attached Images DSC_0008.jpg (41.3 KB) DSC_0007.jpg (42.7 KB)

Great bike - put 30 miles on it yesterday, going out for another ride now.

Easiest-to-handle streetbike you'll ever find, perfect as a "trainer". Starts and runs very well, everything works (excepting the tach and speedo, haven't looked into that yet).

Electric start, gear indicator lets you know what gear you're in at all times!

Clean and clear title, and $200 below bluebook (it's a 1991). Email direct if you're interested or have questions .. .thanks for looking. Just trying to thin the herd a little.

http://hawkfan4life.com/R1000/gn1.jpg

Photo from this past week - the date on my camera resets to something random every time I change the batteries, so ignore that!

Email direct: robb.zimdars@gmail.com

Been looking for one for a while but they're few and far between (new ones are way too expensive). Anyone parting with one? Prefer M4 but interested in any option.

PM or email bacarl (at) mtu.edu

Looking for some right side parts to put my bike back together. Also need the front fairing and a headlight.

Right mirror
Right upper fairing cover
Right Peg
Exhaust
Sticker Set for 05 in blue
Front fairing
Headlight
Windscreen
Bar ends

Anyone have some of these parts or know of an inexpensive place to get them please let me know.

Thanks

Bluebook is $4100 ... this one was dropped in gravel, and suffered some cosmetic damage. Was rebuilt and inspected, and now has a "good" Wisconsin title in my name.

Pic from earlier this week:
http://hawkfan4life.com/R1000/r1.jpg

Starts and runs beautifully. Brand new Aztec8 black-on-black headlight kit, and fresh professional paint as of about a week ago. Put 50 miles on yesterday, and a couple hundred last weekend ... runs VERY strong.

Asking $3200, if you like to haggle, or $2900 if you just want the best, bottom line price. Will entertain partial bike trades, if you've got something cheaper you'd like to supplement with some cash.

You can reach me directly at robb.zimdars@gmail.com

Thank ye.

$30 shipped anywhere in the lower 48 ... email me direct: robb.zimdars@gmail.com

Pirelli Diablo Supercorsa take offs.

SC2 or SC3.


120-70-17
190-55-17

Anodized black, mint conditioin Vortex case covers for R6. $250 for the pair.

99 or 00 lol sorry not sure got all the paper tho, asking $1500 firm
runs tip top, 1st start and its on.sharp and easy to ride.

track bikes (could be converted to street)

http://sfbay.craigslist.org/sby/mcy/1934594916.html


thanks:teeth

These are MotoGP cow leathers that have been down once at summit, turn one. wasn't on the track long, slid into the gravel. no holes. basically just scuffed them up a bit.

i tried to show the scuffs in the photos, if you want more lemme know.

these are 46 and are made of cow, not the roo. asking 425.00, free shipping via ups. questions snafuracing @ gmail.com.
Attached Thumbnails      

I have a full set of Armor Bodies race bodywork for sale with an SBK tail.
Have it up on eBay, starting bid at 305.00!!!!!
I also have 100% feedback.

Here's the link.

http://cgi.ebay.com/ebaymotors/ws/eB...fvi%3D1&_rdc=1

I'm in Toms River and Local pickup is welcome as well.

Bought in Feb this year; used ONCE (yes ONCE and only ONCE).

Selling both as a set. $1,350 total + shipping for your location (this includes the ext fork caps).

Work performed by Ohlins USA in Hendersonville, NC. I worked with Mike (t-man), and Gary was Ohlins office man that helped me a ton. I have the original invoice from Ohlins (invoice number 67827). I can send a parts list/invoice/etc. You can also call Gary at Ohlins or Mike to verify that this set is completely brand spankin' new (minus the one track day). These guys were very good to me.

Call Brandon at 704-966-9576. First come/paid, first served.

4300.00 USD FIRM
I WILL NOT PART IT OUT, SO DON'T ASK.
This bike is awesome and I will miss it when its gone. Have clean Washington rebuilt Title. Formerly belonged to WMRRA #35

Mods:

* CRG Black/Red Levers

* Attack Bodywork

* Puig Double Bubble Screen

* Vortex Adjustable Rearsets in Black

* Vortex Clip-Ons

* Frame Sliders

* Powercommander III USB w/ Ignition module and Quickshifter

* DID ERV3 Chain and Vortex 16/44 sprockets new 4/2010

* Arata Full Ti Exhaust

* Black Braided Brake Lines front & Rear

* Victory Lane Lightened Rear Rotor

* Woodcraft & Circuit1 case covers/protectors

* Circuit1 Mirror Plates

* HRC 1/6 Turn Race Throttle

* Stock ECU & Harness

* 2003 Rockwall Honda Balanced & Blue Printed Race Engine

o Degreed Cams

o HRC Pistons

o APE CCT

o HRC Close Ratio Tranny

o Yoyodyne Slipper Clutch, new plates 7/2010

o Currently putting out 114hp on AMA Spec fuel with full custom SDM Map. 7/2010. Can achieve nearly 119-120 on R110 or better.

* Oil: Motul 300V 10/40

* Ohlins Rear Shock w/added Ride height lower clevis (rebuilt 4/2010)

* KFG reworked 4/2010 forks w/ .95 springs

* Stomp Grips

* Spider Grip SLR

* Spare Wheels with Pirelli wets

* Spare rotors

* Spare Fuel cell

4300.00 USD FIRM
I WILL NOT PART IT OUT, SO DON'T ASK.
This bike is awesome and I will miss it when its gone. Have clean Washington rebuilt Title. Formerly belonged to WMRRA #35

Mods:

* CRG Black/Red Levers

* Attack Bodywork

* Puig Double Bubble Screen

* Vortex Adjustable Rearsets in Black

* Vortex Clip-Ons

* Frame Sliders

* Powercommander III USB w/ Ignition module and Quickshifter

* DID ERV3 Chain and Vortex 16/44 sprockets new 4/2010

* Arata Full Ti Exhaust

* Black Braided Brake Lines front & Rear

* Victory Lane Lightened Rear Rotor

* Woodcraft & Circuit1 case covers/protectors

* Circuit1 Mirror Plates

* HRC 1/6 Turn Race Throttle

* Stock ECU & Harness

* 2003 Rockwall Honda Balanced & Blue Printed Race Engine

o Degreed Cams

o HRC Pistons

o APE CCT

o HRC Close Ratio Tranny

o Yoyodyne Slipper Clutch, new plates 7/2010

o Currently putting out 114hp on AMA Spec fuel with full custom SDM Map. 7/2010. Can achieve nearly 119-120 on R110 or better.

* Oil: Motul 300V 10/40

* Ohlins Rear Shock w/added Ride height lower clevis (rebuilt 4/2010)

* KFG reworked 4/2010 forks w/ .95 springs

* Stomp Grips

* Spider Grip SLR

* Spare Wheels with Pirelli wets

* Spare rotors

* Spare Fuel cell

Hey all, I hate to get rid of the NX but my girlfriend really wants a more street oriented bike now and in order to do so we have to sell the NX we bought for her last year. Believe me if I could just pay for it out of my pocket I'd keep it :).
This NX has 8000 miles on it and must not have seen much off road duty before we got it when it had 6000 miles on it. I've taken it off road once myself for a day and it is a surprisingly capable bike. It will reach nearly 80mph on the highway so you can get to the off road stuff quickly via the highway.
Last year when we got it I put in fresh fork oil and I also replaced the stock shock with a stock unit from my SV650 so the bike sits a little higher now than stock form. It's got a new (less than 1k miles) Trailwing 101 on the front (not shown in the photo) and a very good condition Duro tire on the rear.
I installed a new chain and sprockets a few months ago so probably only a few hundred miles on it at most. Oil and filter and air filter were replaced about 1500 miles ago.
Everything works perfectly. The only thing I feel needs to be addressed is that the throttle cable should be replaced down the road. It has rubbed a bit around the steering head and has worn away some of the plastic sheath. It doesn't stick or cause problems but eventually it should be addressed.
The photo below is of the bike when we bought it and I will post up some new photos tomorrow. I think considering the condition of this bike that 1800.00 is fair. The location is in Old Hickory, TN and I would say that I could deliver to surrounding areas but I don't have a truck or trailer at the moment. PM me or email to editor at nashvilleriders dot com if you're interested.

Thanks,
'Servo (brandon)

Hi folks, I'm selling a brand new set of bridgstone bt016 tires 120/180.
selling for $210 save $18 vs cyclegear!

4300.00 USD FIRM

This bike is awesome and I will miss it when its gone. Have clean Washington rebuilt Title.
I WILL NOT PART IT OUT, SO DON'T ASK.

Mods:

* CRG Black/Red Levers

* Attack Bodywork

* Puig Double Bubble Screen

* Vortex Adjustable Rearsets in Black

* Vortex Clip-Ons

* Frame Sliders

* Powercommander III USB w/ Ignition module and Quickshifter

* DID ERV3 Chain and Vortex 16/44 sprockets new 4/2010

* Arata Full Ti Exhaust

* Black Braided Brake Lines front & Rear

* Victory Lane Lightened Rear Rotor

* Woodcraft & Circuit1 case covers/protectors

* Circuit1 Mirror Plates

* HRC 1/6 Turn Race Throttle

* Stock ECU & Harness

* 2003 Rockwall Honda Balanced & Blue Printed Race Engine

o Degreed Cams

o HRC Pistons

o APE CCT

o HRC Close Ratio Tranny

o Yoyodyne Slipper Clutch, new plates 7/2010

o Currently putting out 114hp on AMA Spec fuel with full custom Speed Dealer Motors Map. 7/2010. Can achieve nearly 119-120 on R110 or better.

* Oil: Motul 300V 10/40

* Ohlins Rear Shock w/added Ride height lower clevis (rebuilt 4/2010)

* KFG reworked 4/2010 forks w/ .95 springs

* Stomp Grips

* Spider Grip SLR

* Spare Wheels with Pirelli wets

* Spare rotors

* Spare Fuel cell
Attached Thumbnails  

:) Hi Everyone, I have One Only, SV650, Gen 2, Full Set Hot Bodies Race Body Work, New in Box Never Mounted,

Absolutely Brand New, in Box Never Mounted, These are regualar $650 plus Taxes a set, Yours for $525 all in,

Shipping will be actual cost from 98230 to your door,

Email me directly at b.layton@svracingparts.com and I will get you looked after right away,

Enjoy the ride, and best regards,
Blair

The PVMs are aluminum. Retail on these are $3200. Awesome design that stands out everywhere they go. Straight wheels with no tires. One rim has a light sratch in the lip but its not bent. Just scratched. Rotors not included. Had these on my 05/06 GSXR 1000.

$1800 shipped

Got an extra set of wheels off my 2007 ktm 300.They are complete with tires. The rims are scratched up from use and the front has a dent.These would make a good back up set .Includes tires rotors.

they are black

$300

Ignition is wired into the factory kill switch. Gets rid of ignition switch completely. Ignition housing is milled off of top triple.

$100 shipped

Condition is perfect! Mounted but never used Vortex Fairing Stay Bracket for 06+ GSXR 600/750.

Black in color and comes with quick disconnect bungs/clips for easy fairing removal.

Asking $90 shipped.

:rock:

I Have my 06 GSXR 600 for sale with 7k miles on it. It has a Virginia Non Repairable title due to the original owner had a small lowside and crack the upper fairing stay. Insurance declaired it non - reapairable for that reason and some small scrathes in the swingarm.

the bike was all stock last year and i worked on it during winter converting it to race/track, i love this bike nothing is wrong with it, it only needs a rider.

Mods:

M4 exhaust

Vortex upper fairing stay with quick release

Vortex rearsets

vortex clip ons

Vortex frame sliders

Brembo master cylinder

front stainless steel brake line

rjls brake pads.. ( these brake bads with the brembo is awsome)

penske triple (185-195 pounder just serviced from penske this year)

vortex gas cap

This bike is awsome! ive only done around 5 trackdays on it this year, however some personal issues is making me sale it. if anyone is intrested you can shoot me a email at steviesteve84@yahoo.com

Location: Northern VA
Price $4400.00
Attached Thumbnails    

Almost new Penske Triple clicker with remote reservior and all the paperwork. Comes with all the mounting hardware, , preload tool, stickers, etc.

Just bought brand new in the spring, barely used. One and a half track sessions and less than 1k street miles on this bad boy. Setup for 200lb rider. Springs are cheap and you can change them easily if you are a different weight.

Fits 06+ GSXR 600/750, may fit other models/years but not sure what.

Asking $800 and I will pay to ship it.

:up:

I have a 2008 GSXR 600 / 750 front wheel for sale. I'm asking $300.:gsxr

06 gsxr 600 , I need 4